Konica 512MH Head Cable 30P300B-1.0 Description
This generic head cable is suitable for Konica 512MH printheads. It connects the print heads to the print carriage board. This cable has 30 pins and is 300mm long and 31mm wide. We recommend changing the head cable when replacing the printhead.
Model: 30P300B-1.0
30P means there are 30 chips on the cable.
300 means the length is 30 cm.
B means the two ends of the chip are on the reverse surface.
1.0 means the distance between the two chips is 1 mm.
Konica 512MH Head Cable Specifications
| Pins | 30P |
| Length | 30 cm |
| Pins Width | 1.0 mm |
| Pin Direction | The chip at Reverse Face (B) |
| Suitable Printhead | Konica 512MH Head |
Konica printhead cable models:
|
Konica head cable | Konica 1024i head cable both sides connector with card | 60P |
| Konica 512i/1024 head cable single side with card | 60P | |
| Konica 512i head cable both sides connector with card | 50P | |
| Konica head cable | 30P300B-1.0 | |
| 34P | ||
| Konica grey line head cable | 40P 70cm | |
| Liyu & Konica head cable | 40P300A-1.0 | |
| Liyu & Konica head cable for 512 | 16P 250 |
